intimus 205 CP7 Security Shredder
The intimus 205 CP7 Security Shredder is the largest volume per hour shredder on the NSA EPL.
- Fastest speed and highest volume Security Level 6/P-7 shredder on the NSA EPL
- Robust and durable chain drive system with steel gears
- Microprocessor controlled auto reverse and anti-jam capability
- Illuminated indicators for stand-by, door open, paper jam and basket full
- Integrated automatic oiler
- 54 gallon/205 liter waste bin
How many sheets at a time will the intimus 205 CP7 shred?
With close to real world testing, staff at the US National Security Agency (NSA) determined that the intimus 205 CP7 will accommodate 11 sheets per pass and destroy 29 reams of paper per hour. This information is published by the NSA on their Evaluated Products List (EPL) for paper shredders. The capacity of the shredder is important as the number one complaint of users of Top Security shredders is wait time. The intimus 205 CP7 shreds 2,000 more sheets per hour than its nearest competitor.
What is the difference in performance between chain drive and plastic gears?
The intimus 205 CP7 uses metal gears and a chain to drive the cutting head from the electric motor. Most manufacturers use plastic gears in their drive train to reduce cost. Plastic gears also reduce noise but they have a higher failure rate than metal gears. Metal gears and chain drive systems are generally found on industrial shredders due to their long service life and consistent performance. The intimus 205 CP7 is built with industrial quality for Top Secret office applications.
Why do some Top Secret (Level 6) shredders have oilers?
The cut size of a Level 6 shred is less than 5 square millimeters. To make a cut this small causes friction and heat in the cutting head. Automatic oilers help to reduce heat of the cutting head and prolong the life of the shredder. However, regular office paper rarely causes heat build-up in most Level 6 shredders as they do not have sufficient feed rate to build extreme friction and heat. The intimus 175 CP7 will operate both with and without an automatic oiler. The automatic oiler does save time by keeping the cutting head lubed rather than having the user manually spread oil on the cutting head when needed.
Why won’t Level 6 shredders take staples and paper clips?
A Level 6 shred width is 1mm or less. It is very easy to have a paperclip or a staple jam the cutting head as staples and paperclips are often wider than 1mm and do not compress like paper does. To get a 1mm width, the cutting head width between blades is smaller because of the way paper compresses when it is cut and then expands again after the cut. Great care must be taken to assure that staples and paper clips and other non-paper material does not enter the shredder